u[sonic]WS6

Weather sensor

u[sonic]WS6

Weather sensor

Applications

professional meteorological application
wind turbines on- and off-shore
ship weather station
building automation and environmental engineering
traffic and industrial meteorology
wind warning and event engineering
photovoltaic large-scale plants
alpine applications

Your contact person:
Gary Nagy
+49 551 4958-343
gnagy
(at)lambrecht.net
Contact

Datasheet

The all new multi parameter sensor u[sonic]WS6 ...

The u[sonic]WS is the newest, most compact and system-capable addition to the Lambrecht meteo weather sensor series.
The sensor has no moving measuring elements and is therefore low-maintenance. The intelligent heating system works in relation to the wind speed and direction and keeps the sensor ice-free even under extreme weather conditions.
The u[sonic]WS6 easily meets the special challenges of alpine and maritime applications.
A wide variety of interfaces and protocols are available. There are no limits for the u[sonic]WS6 when it comes to its applications.

without moving measuring elements
6 weather parameters: wind direction and speed, air temperature, rel. humidity, barometric pressure, dew point
intelligent heating depending on wind speed and wind direction
lamella shelter for accurate measurements of the temperature-humidity sensor
easy installation, easy to maintain

Data sheet
Accessories
Data loggers

Professional Line

u[sonic]WS6

Id-No.:

00.16480.000000

Meas. range wind direction:

0...359.9°

Meas. range wind speed:

0...65 m/s

Meas. range air temperature:

-40...+70 °C

Meas. range rel. humidity:

0...100 %

Meas. range barometric pressure:

300...1100 mbar

Accuracy wind direction:

< 2° (> 1 m/s) RMSE

Accuracy wind speed:

± 0,2 m/s RMSE (v < 10 m/s) • ± 2 % RMSE (10 m/s < v < 65 m/s)

Accuracy air temperature:

± 0.1K (0...60 °C) • ± 0.2K (-40...0 °C)

Accuracy rel. humidity:

typ. ± 1.5 % (0...80 %) r.h. • ± 2 % (80...100 %) r.h.

Accuracy barometric pressure:

± 0.5 mbar

Resolution wind direction:

0.1°

Resolution wind speed:

0.1 m/s

Resolution air temperature:

0.1 °C

Resolution rel. humidity:

0.1 %

Resolution barometric pressure:

0.1 mbar

Trigger threshold:

0.1 m/s

Protocols:

NMEA 0183 • Modbus • SDI-12 (optional) • other protocols on request

Interface:

RS485 / 422 • SDI-12 (optional)

Measuring rate:

0.1...10 Hz

Operating conditions:

-40...+70 °C (with heating: -50...+70 °C) • 0...100 % r. h.

Supply voltage:

without heating: 6...60 VDC • with heating: 24 V AC/DC ± 20 %

Current consumption:

sensor: typ. 50 mA at 24 VDC • with heating: max. 10 A at 24 V AC/DC

Heating data:

factory configurable: 60 W / 120 W / 240 W (standard)

Dimensions:

Ø 199 mm • height 238 mm

Housing:

seawater resistant aluminium

Protection class:

IP 66 • IP 67

Weight:

approx. 3.1 kg

Standards:

Salt fog: EN 60945 • Low voltage guide line: 72/23 EWG

EMC standards / Electrical safety:

DIN EN 60945 • DIN EN 61000-4-2, 3, 4, 6, 11

Accessories (order separately):

32.16470.060000 sensor cable, 15 m, 8-pol. M16-plug

METEO-LCD-IND Digital indicator

is very versatile and flexible. The high contrast display can be adjusted by a dimmer to the prevailing lighting conditions. The compact design proves to be very advantageous and cost efficient when mounted into control panels. The instruments are reliable and cross-linkable. They can, when series connected, display all 6 measured main parameters at the same time.

big, graphic, high-resolution display with background illumination
contrast and brightness adjustable
variety with waterproof front plate design
low mounting depth
galvanically separated supply and signal channels
momentary, mean and extreme values

CS3 MeteoWare

Meteoware CS3 is a modular, scalable software package for recording and evaluating meteorological data. It can be scaled from simple single-user systems with one data logger to an application distributed via LAN/ Internet with up to 999 users.

MeteoWare CS3 can be used with together with the data acquisition systems Ser[LOG], met[LOG], TROPOS, SYNMET and PreLOG. Furthermore with the following serial wind and weather sensors: u[sonic], PREOS, EOLOS, WENTO, ARCO-SERIAL und dem Feuchte-Temperatursensor 8095.

It is the ideal software for Weather Services and Environmental Offices, industries, sewage treatment plants & dumpsites, airports and many other applications.

Ser[LOG] Data logger

The Ser[LOG] system family allows you the greatest possible freedom for customizing your measurement tasks: extensibility due to modular design, high flexibility due to a variety of configuration options and many possibilities through state-of-the- art communication interfaces

Ser[LOG] can be extended to a total of 3 AnDiMod analog/digital measuring modules. Available then up to 36 differential analog channels and 11 digital channels.

extensive sensor library
formulary and free formula parser
integrated alarm system for 10 alarm outputs via built-in and external relays, email, SMS
interference-proof due to high-quality, shielded aluminium housing
user-friendly with free access to all connections and controls

met[LOG] with met[APP] Data logger

The data logger met[LOG] and its browser app met[app] quickly and easily transfer your climate data into your network (LAN). The met[LOG] has an autoconfiguration via plug & play for the uncomplicated commissioning of the serial LAMBRECHT meteo sensors.

met[APP]

The browser app which is integrated in the met[LOG] for easy visualisation of the current climate data in your network. Platform-independent on your PC, tablet or smartphone.

displays the instantaneous values of your LAMBRECHT meteo station
exports the measured values stored by the met[LOG]
configures the met[LOG]

Features and advantages:

real-time access to measurement data via integrated web server, visualised in your browser with met[APP]
met[LOG] calculates trends and patterns, and automatically performs corrections based on altitude and air pressure
thanks to its digital outputs the met[LOG] immediately issues a warning or raises an alarm
plug & play · auto-configuration by push of a button allows full working capability within seconds
various combinations are possible: 7 interfaces allow connection of 4 analog and 3 serial sensors