met[LOG] with met[APP]

Data logger

Data loggerEthernetLow power sensorRS485 input
met[LOG] with met[APP] · Data logger

met[LOG] with met[APP]

Data logger

Applications

  • building automation
  • environmental monitoring
  • weather services
  • universities
  • informtion plattforms
  • industry
  • wind warning
  • spas
Gary NagyGary Nagy

Your contact person:
Gary Nagy
+49 551 4958-343
gnagy
(at)lambrecht.net
Contact

Datasheet

Met[Log] systems

Add to watch list

Smart serial solution

The data logger met[LOG] and its browser app met[app] quickly and easily transfer your climate data into your network (LAN). The met[LOG] has an autoconfiguration via plug & play for the uncomplicated commissioning of the serial LAMBRECHT meteo sensors.

 met[APP]

The browser app which is integrated in the met[LOG] for easy visualisation of the current climate data in your network. Platform-independent on your PC, tablet or smartphone.

  • displays the instantaneous values of your LAMBRECHT meteo station
  • exports the measured values stored by the met[LOG]
  • configures the met[LOG]

Features and advantages:

  • real-time access to measurement data via integrated web server, visualised in your browser with met[APP]
  • met[LOG] calculates trends and patterns, and automatically performs corrections based on altitude and air pressure
  • thanks to its digital outputs the met[LOG] immediately issues a warning or raises an alarm
  • plug & play · auto-configuration by push of a button allows full working capability within seconds
  • various combinations are possible: 7 interfaces allow connection of 4 analog and 3 serial sensors
Professional Line
met[LOG] with met[APP]
Id-No.:
00.95800.000 000
Measuring range:
Voltage input: 0...10 V
Accuracy:
Analogue: 12 bit
Signal input:
4 analogue/ digital input • range: 0...10 V (confi gurable) • Ri ≥ 10 KΩ
Output:
4 digital output • digital output max. voltage: V0-0.1 V up to V0 • max. 0.7 A
Protocols:
NMEA · WIMWV · WIMWD · WIMTA · WIMMB · WIMHU · WIXDR • rain[e]-talker • SDI-12 on RS 485 (rain[e])
Interface:
3 x RS 485 • A+, B-; half duplex
Operating conditions:
-40...+85 °C
Supply voltage:
11…32 VDC
Current consumption:
500 mW typically (no digital output active)
Storage capacity:
Accessory: 8 Gb SD card, Id.-No. 32.95800.010000
Storage interval:
1 min · 2 min · 5 min · 10 min
Ethernet:
10/100 BaseT • connector RJ45 shielded
Data evaluation:
integrated web page for visualisa • configuration web page
Dimensions:
17.8 x 89 x 60 mm
Housing:
1 sec · configurable
Weight:
62 g
Standards:
EMC: IEC 61000-4-2 up to 8 kV
Included in delivery:
automatic configuration of connected serial LAMBRECHT sensors: rain[e], EOLOS, WENTO, ARCO and THP sensor as well as all Modbus sensors of LAMBRECHT
Accessories (order separately):
00.14966.715000: power[cube]
00.14966.300000: 60 W power supply