Lambrecht meteo
Friedländer Weg 65-67
37085 Göttingen
Tel.: +49-(0)551-4958-0
Fax: +49-(0)551-4958-312
Home > wind > Building Automation > Data logger met[LOG] with met[APP]

Data logger met[LOG] with met[APP]

Smart serial solution

The data logger met[LOG] and its browser app met[app] quickly and easily transfer your climate data into your network (LAN). The met[LOG] has an autoconfiguration via plug & play for the uncomplicated commissioning of the serial LAMBRECHT meteo sensors.


The browser app which is integrated in the met[LOG] for easy visualisation of the current climate data in your network. Platform-independent on your PC, tablet or smartphone.

  • displays the instantaneous values of your LAMBRECHT meteo station
  • exports the measured values stored by the met[LOG]
  • configures the met[LOG]

Features and advantages:

  • real-time access to measurement data via integrated web server, visualised in your browser with met[APP]
  • met[LOG] calculates trends and patterns, and automatically performs corrections based on altitude and air pressure
  • thanks to its digital outputs the met[LOG] immediately issues a warning or raises an alarm
  • plug & play · auto-configuration by push of a button allows full working capability within seconds
  • various combinations are possible: 7 interfaces allow connection of 4 analog and 3 serial sensors

Learn more about our met[LOG] system. Create your own weather station with all accessories around the data logger met[LOG]. Our brochure “Smart system solutions” will guide you through the possible combinations.

Download the PDF brochure now (1.747 KB): metlog_systems_en.pdf


Weather sensor Ethernet interface RS485 digital input Low power sensor

Your contact person

Daniel Dreilich
+49 551 4958-395
  Data logger met[LOG] with met[APP]
Id-No. 00.95800.000 000
Measuring range Voltage input: 0...10 V
Accuracy Analogue: 12 bit
Output 4 digital output • digital output max. voltage: V0-0.1 V up to V0 • max. 0.7 A
Protocol NMEA · WIMWV · WIMWD · WIMTA · WIMMB · WIMHU · WIXDR • rain[e]-talker • SDI-12 on RS 485 (rain[e])
Interface 3 x RS 485 half-duplex
Operating conditions -40...+85 °C
Supply voltage 11…32 VDC
Current consumption 500 mW typically (no digital output active)
Power consumption 500 mW typically (no digital output active)
Storage capacity Accessory: 8 Gb SD card, Id.-No. 32.95800.010000
Storage intervall 1 min · 2 min · 5 min · 10 min
Data transfer Ethernet: 10/100 BaseT • connector RJ45 shielded
Data evaluation integrated web page for visualisa
Display 1 sec · configurable
Dimensions 17.8 x 89 x 60 mm
Housing Plastic, green
Weight 62 g
Standards IEC 61000-4-2 up to 8 kV
Accessories power[cube]: Id.-No. 00.14966.715000