u[sonic]

Ultrasonic wind sensor

LongevityNMEA data protocolSeawater resistentNo moving partsHeatedMetal materialPremium
u[sonic] · Ultrasonic wind sensor

u[sonic]

Ultrasonic wind sensor

Applications

  • Professional meteorological application
  • Wind turbines on- and offshore
  • Ship weather station
  • Building automation
  • Traffic and industrial meteorology
  • Wind warning

Seawater resistant and per­fectly heated

The combined ultrasonic sensor u[sonic] for wind direction and wind speed. The seawater resistant sensor is per­fectly heated and ideal for use under cold climate conditions. The equipment is connected by an 8 pole screw connector. The measured values can be requested over a variety of interfaces.

  • Meets the requirements for meteorological measurements according to WMO
  • No moving measuring elements, no wear
  • Two parameters measurable
  • intelligent heating depending on wind speed and wind direction
  • Easy to install, very service friendly


Professional Line
u[sonic]
Id-No.:
00.16470.100000
Meas. range wind direction:
0...359.9°
Meas. range wind speed:
0...75 m/s
Accuracy wind direction:
< 2° (> 1 m/s) RMSE
Accuracy wind speed:
± 0.2 m/s RMSE (v < 10 m/s) ; ± 2 % RMSE (10 m/s < v < 65 m/s)
Resolution wind direction:
0.1°
Resolution wind speed:
0.1 m/s
Trigger threshold:
0.1 m/s (adjustable for wind direction)
Output:
RS 485 NMEA0183 ; 4...20 mA (default setting)
Configurable (analog): 0...20 mA; 0...5 V; 0...10 V
RS 422 (optional; please specify when ordering: Id-No.: 97.16470.000422 Configuration RS 422 output)
Protocols:
NMEA 0183
Modbus RTU (optional; please specify when ordering: Id-No.: 97.16470.000001 Configuration Modbus)
SDI-12 (optional; please specify when ordering: Id-No.: 97.16470.000002 Configuration SDI-12)
other protocols on request
Measuring rate:
0.1...10 Hz; (internal measurement 50 Hz)
Operating conditions:
-40...+70 °C (with heating -50...+70 °C); 0...100 % r. h.
Strongest wind impact velocity:
100 m/s
Supply voltage:
6...60 VDC; 24 V AC/DC
Current consumption:
sensor: typically 45 mA at 24 VDC and deactivated analog output
heater factory configurable: 60 W; 120 W; 240 W (standard)
Measuring principle:
ultrasound
Heating data:
configurable (factory-setting) 60 W; 120 W; 240 W (standard)
Dimensions:
Ø 199 mm; height 149 mm
Housing:
seawater resistant aluminium
Protection class:
IP 66; IP 67
Weight:
approx. 2 kg
Standards:
VDE 0100; Low voltage guide line: 72/23 EWG
EMC/ EMI: DIN EN 60945 and DIN EN 61000-4-2, -3, -4, -5, -6, -11
Protection class: DIN EN 60529
MIL-STD-810G
DIN EN 50121-4:2016
Salt fog: EN 60945
Cold test Ad acc. to DIN EN 60068-2-1 (01/2008)
Condensation test CH acc. to ISO 6270-2 (09/2005) and DIN EN ISO 12944-6 (07/1998), category C4
Salt mist test based on DIN EN ISO 7253 (04/2002) and DIN EN ISO 12944-6 (07/1998), category C4
Accessories (order separately):
32.16470.060000 Sensor cable, 15 m; 8-pole M16
METEO-LCD-IND · Digital indicatorMETEO-LCD-IND Digital indicator

This indicator is extremely versatile and flexible. The high contrast display can be adjusted by a dimmer to the prevailing lighting conditions. The compact design proves to be very advantageous and cost efficient when mounted into control panels. The instruments are reliable and cross-linkable. They can, when series connected, display all 6 measured main parameters at the same time.

  • Big, graphic, high-resolution display with background illumination
  • Contrast and brightness adjustable
  • Variety with waterproof front plate design
  • Low mounting depth
  • Galvanically separated supply and signal channels
  • Momentary, mean and extreme values
Read more
MeteoWare CS3 · Meteorological evaluation softwareMeteoWare CS3 Meteorological evaluation software

Accurate data acquisition is the starting point of any weather monitoring solution. With our data loggers and sensors, you get precise and reliable readings under any condition. The flexible Ser[LOG] data loggers offer a wide range of customizable configurations and state-of-the-art communication interfaces for all your measurement tasks and requirements. Existing sensors, including those from other manufacturers, can be easily added and used with the included sensor library. The Ser[LOG] data loggers are ideal for setting up even large weather measurement networks.

The Lambrecht MeteoWare CS3 app provides support for the acquisition, provision, analysis, visualization and archiving of large data volumes.

Selectable evaluation definitions, evaluation period, graphic types 

MeteoWare CS3 is a modular, scalable program package for the acquisition and evaluation of meteorological data. It can be scaled from a simple single-user system with one data logger to a LAN/Internet distributed application with up to 999 users and up to 999 data loggers. 

System requirements:
Runs on Windows® 7 or higher
Desktop systems only

 

Read more
met[LOG] with met[APP] · Data loggermet[LOG] with met[APP] Data logger

The data logger met[LOG] and its browser app met[app] quickly and easily transfer your weather data into your network (LAN). The met[LOG] has an autoconfiguration via plug & play for the uncomplicated commissioning of the serial LAMBRECHT meteo sensors.

Browser App met[APP]

The browser app which is integrated in the met[LOG] for easy visualisation of the current meteorological data in your network. Platform-independent on your PC, tablet or smartphone.

  • Displays the instantaneous values of your LAMBRECHT meteo station
  • Exports the measured values stored by the met[LOG]
  • Configures the met[LOG]

Features and advantages:

  • Real-time access to measurement data via integrated web server, visualised in your browser with met[APP]
  • met[LOG] calculates trends and patterns, and automatically performs corrections based on altitude and air pressure
  • Thanks to its digital outputs the met[LOG] immediately issues a warning or raises an alarm
  • Plug & play: Auto-configuration by push of a button allows full working capability within seconds
  • Various combinations are possible: 7 interfaces allow connection of 4 analog and 3 serial sensors
Read more
Ser[LOG] · Data loggerSer[LOG] Data logger

The Ser[LOG] collects your weather data (wind, precipitation, air temperature, relative humidity, air pressure and radiation) in a single place and provides real-time visualization. The Ser[LOG] Commander management app gives you maximum freedom to customize your measurement tasks. 

Overview:

  • Collect and process up to 60 measured values with Modbus RTU
  • Up to 32 Modbus TCP connections with sensors from other manufacturers
  • Alarm system for 10 warning channels using built-in and external relays (e-mail, SMS)
  • Extensive sensor library
  • Formulary and free formula parser
  • Interference-proof due to high-quality, shielded aluminium housing
  • User-friendly with free access to all connections and controls
Read more