Ser[LOG]-NAV-MIL

The Ser[LOG]-NAV-MIL is a fully pre-configured high-end solution for precise and ready-to-use data acquisition and processing - even under extreme operating conditions

• Ships with increased requirements for robustness and safety

• Data sheet
• 95770 SerLOG NAV MIL Manual

The Ser[LOG]-NAV-MIL is a fully pre-assembled data acquisition and monitoring system in arobust control cabinet for wall mounting. All components are installed and ready for operation – for quick commissioning with minimal effort, even under demanding conditions. At its heart is the Ser[LOG]-NAV, a flexibly configurable data logger for the precise recording and processing of weather data. Integration into on-board and navigation systems provides reliable control-relevant information. Hardware and software are optimally coordinated and increase the safety of crew, passengers, and cargo.

• Wind-dependent port-starboard switch
• true wind calculation
• 4 Hz rotation detection for mechanical wind sensors
• Support for ship-specific NMEA protocols
• NMEA data management and output
• Surge protection through independent SPDs

• Data sheet
• Data logger

Professional Line	Ser[LOG]-NAV-MIL
Ident-No.	00.95770.700000
Signal input	2 status inputs
Output	2 potential-free, configurable relays (intended for automatic port-starboard switching)
Interface	5 x RS-485 or 6 x RS-422 or 4 x RS-232 USB device, and USB host
Operating conditions	-30 to +70 °C; 5 to 95% relative humidity (non-condensing)
Supply voltage	10...30 VDC
Power consumption	From 34 mA (12 V) to 240 mA (12 V) depending on configuration
Storage space	1 year in ring buffer (8-byte IEEE real format)
Ethernet	100 Mbit, RJ45 connection
Dimensions	433 x 313 x 181 mm
Housing	Ser[LOG]-NAV-MIL: Aluminum; Control cabinet housing: Die-cast aluminum
Weight	12.7 kg
EMC standards / Electrical safety	IEC 60945; RS-422 and RS-485 with up to 2.5 kV isolation; all interfaces with 15 kV ESD protection
Included in the scope of delivery	The wall-mounted die-cast aluminum enclosure contains: the Ser[LOG]-NAV data logger, a power supply, surge protection, a distribution block, independent SPDs, and DNV-certified stainless steel cable glands.
Options (order separately)	97.95770.000000 Configuration of Ser[LOG] according to wiring diagram 96.00000.100000 Creation of circuit diagram / wiring diagram 00.90227.300002 Sensor switch (if two wind sensors are installed)

Ser[LOG]-NAV Data logger

Ser[LOG]-NAV is an individually configurable and flexible data acquisition and monitoring system. The data logger professionally records weather data, course and speed data and can be integrated into the on-board computer and navigation systems to provide information for steering the ship. Calculations such as True Wind are performed automatically. Hardware and software work seamlessly together to protect passengers, crew and cargo.

• 6 serial multifunctional interfaces for data input and data output
• True wind calculations and support for multiple wind sensors
• Manual/automatic selection of two wind sensors with windward and leeward detection
• Calculates additional parameters, including dew point, absolute humidity and wet bulb temperature
• Supports individual ship-specific interference sector corrections
• Alarm system for up to 10 warning channels with multiple relays

Learn more