- Further parameters
- Systems & sets
- LAMBRECHT meteo
under the static sensors, specially designed for extreme environmental conditions. The sensor has no movable measuring elements and is for use in very high wind speeds of up to 65 m/s. This extremely robust and compact sensor has a high-quality, pollutant-resistant housing made of anodised aluminium.
|Static wind sensor PREOS|
|Measuring range||wind direction: 0...360 ° • wind speed: 0.1...65 m/s|
|Accuracy||wind direction: ± 3° • wind speed: ± 0.5 m/s ± 5% of the meas. value|
|Resolution||wind direction: 1° • wind speed: 0.1 m/s|
|Output||4...20 mA for wind speed and wind direction|
|Protocol||NMEA 0183 • WIMWV|
|Interface||serial • RS 422/ talker • baud rate 4800 • 1 Hz (meas. cycle of 4 Hz) • 8 N 1|
|Strongest wind impact velocity||100 m/s|
|Supply voltage||18...32 VDC • max. 2.5 A • heating: 24 VDC/ 70 W (max. 3 A) • electr. controlled|
|Dimensions||H 298 mm • Ø 108 mm • mast adapter Ø 50 mm for mounting on standard pipe|
|Housing||aluminium • anodised • IP 66|
|Options||connectable to: Indicator unit e.g. (14742) METEO-LCD • Data logger e.g. met[LOG], Ser[LOG] and SYNMET-LOG|
|Accessories||not included in scope of delivery: Mast and power supply unit • Visualisation and evaluation software "MeteoWare CS3"|
Digital indicator METEO-LCD-IND
is very versatile and flexible. The high contrast display can be adjusted by a dimmer to the prevailing lighting conditions. The compact design proves to be very advantageous and cost efficient when mounted into control panels. The instruments are reliable and cross-linkable. They can, when series connected, display all 6 measured main parameters at the same time.
Data logger SYNMET-LOG
The perfect combination of the system's components offers a high degree of flexibility and reliability. The two-piece housing divides high quality electronics and installation. The galvanic separation of the measuring system, remote configuration and diagnosis are representative of a multitude of modern, future-proof features.
* Ethernet connection kit required